Letterpress Studio for Sale

$5200 for everything, or sold individually, see pricing below.

Letterpress items being sold. Photos are in sets according to how they are being sold. Note that table and press are being sold separately; if you want the two of them together, please contact me quickly.

All is local pickup, no shipping. I am in Olympia, WA, which is between Seattle and Portland. The Press, Table, and Furniture cabinet are in a garage, no steps, easy access. The Paragon Guillotine Cutter is up a flight of stairs; we can dismantle it for you but the top portion is fairly heavy, and takes 2 men to move. As does the press, for that matter. but in the case of the cutter, it is two men and some stairs. The guys who brought it up didn’t have a lot of trouble but they were professionals.

Please email or call me for further details and information. (My AirBnB may be available if you need a night during your pick up. Viewable at www.OlympiaBungalow.com, but contact me directly on this…it has a 3 night minimum normally.)

For more information call Kayle Simon at 410-419-9119. Or email kayle@realfreshcreative.com.  Please leave a message if you get my machine. Thank you!

OldStyle C& P Pilot with rare Stirrup Handle and Custom Hamilton Table

$4500 for Press, Table and all extras pictured here.

Honestly I’m ready to pass this baton but also a little bit heartbroken because for me, just looking at this makes me happy. But I haven’t used it in a while and am feeling like my days have passed…it should go to someone who will love AND use it.

I’ve had it for 17 years. It had one repair, done beautifully but the best in the business, on a part that is not under a lot of pressure, so it should hold for another 100 years. Close ups show where T&T braised and repaired one sleeve/arm. I’ve used it about 3 times since that repair was done. (It was broken when it “rolled” during a cross-country move, btw, not during regular use; there would be no reason for this part to have that kind of lateral pressure on it, to ever break. These presses are top heavy, and you want to put them on wooden “sleds” when moving them. That’s why they have the holes in the feet…so you can attach it to a table or sleds.)

It is a very rare C&P Original in that it has the stirrup handle. This was an upgrade and it is SO much more comfortable to pull the arm because of it, with a wood handle that spins for a comfortable hand hold. I look at the more common handles and feel uncomfortable right away, I’ve been so spoiled by this.

And I’m sorry but those curvy legs are just stunning…

It is missing no parts at all. I did build up the rails. It has new rollers, trucks, and loads of extras; you can print without buying a thing. Happy to set it up for printing when you arrive so we can run it through it’s paces…you’ll have to just give me an hour after to get all the ink cleaned off.

I’m not offering to ship this at this time and have no shipping case built for it. It’s very easy to pick up. I’m about mid way between Portland and Seattle.

Happy to answer questions, facetime you to show you any close ups…just send me a note at kayle@realfreshcreative.com.

Hamilton Table, Originally Made for C&P Pilot Printing Press.

$6000 with Press above, and all extras.

Hamilton made so many table benches and worktops for printers, but I have never seen one that is so clearly made for a C&P Pilot. The slots for Chases, and the curved holders for the rollers, are exact fits. Made of Oak, top is painted gray, press sits at a perfect height for comfortably pulling the arm down. It’s really quite lovely and such a perfect spot to put your press. I’m surprised we don’t see more of these out there…but it’s the only one like it I have found. In good shape, no cracks or issues. I’ll probably do a good cleaning and replace this photo when I get a chance but it will be stunning with a bit of polishing. Looks to me like even the handles are original.

Furniture Cabinet

$300.00

Cabinet that held wood furniture. Each shelf is a different depth so furniture goes in long ways. Size is 18″ wide, 43″ tall, and 10.5″ deep at bottom (5″ deep at top.)

Paragon Cutter

$600.00

Paragon Paper cutter, cuts up to 21″ wide, with professionally sharpened original blade. I keep the blade off the machine most of the time and built a wood holder for it so the sharpened end can’t be touched; it is SO sharp, and this thing works as smooth as butter and cuts through a fat phonebook, it’s amazing.

We replaced the bottom stringer/bar or whatever you call it with an all steel one, since these are often the parts that bend or break on these. We could have braised it after a break, but our metalsmith felt it was wiser to use modern stronger metal for this, and it looks great. The original crosse one is still in great shape with no noticeable bend or curve.

I have looked it over carefully and see no other braising or repair done to this; I bought it from a guy who had it in his farmhouse. (He actually build the blade holder for me, so nice of him.) Difficult to find one without braising/repairs to the long arm or bent rods in the base. But I’m not asking more than the last one I saw sold 5 years ago…because you do have to bring two strong guys to pick it up.

This is up one flight of stairs and heavy; we remove the top part for moving, that is what will take two strong guys. We had professional movers who brought it upstairs without an issue, though they did stop on the landing and take a rest. But once you have it downstairs it can be moved in pretty much any SUV, it isn’t that large overall. Top part is approximately 42″ wide including handle x about 32″ tall. You would lay this down on it’s back to move it. The base is much lighter, one person can carry that, just make sure it doesn’t twist or torque in your vehicle. The two “dials” on this, that pull your stack of paper forward and press the paper down, move so smoothly, they are a shock to the system…it’s hard to not enjoy how well made this thing was in about 1881.